TOPTEC 4 Roll Plate Bending - Industrial Machinery Brokers

Industrial Machinery Sales Pty. Ltd.
U1, 12-14 Tikalara Street
Regency Park, 5010, South Australia
Telephone: 08 8346 7779
Fax: 08 8340 0624

TOPTEC 4 Roll Plate Bending / Rolls

Back to Index Page

AH 3100x8 - 11mm

Features

Extremely long guideways at the side rollers with minimum foundation dimensions.
All rolls sit 100% in spherical roller bearings.
Large (oversized) roller - diameters with small camber (min. deflection)
Automatic pressure balance system between top to bottom rolls.
Direct drive (hydraulic) of the top and bottom rollers with automatic speed compensation.
Depending on the requirements the shortest flat end possible.
Bottom roll can be adjusted by pressure or position.

Specifications

Model	Working Length mm	Pre- bend mm	Min. Bend mm	Min. Bend mm	Top Roll Ø mm	Down Roll Ø mm	Side Rolls mm	Bending Speed m/min	Motor Power kw
NC-12x4000	4000	12	8	800	380	340	280	4.5	37
NC-16x3200	3200	16	12	800	380	340	280	4.5	37
NC-20x2500	2500	20	16	800	380	340	280	4.5	30
NC-25x2000	2000	25	20	800	380	245	280	4.5	30
NC-32x2500	2500	32	26	1500	520	500	350	4	45
NC-32x4000	4000	32	25	1300	650	580	480	4.5	45
NC-40x3200	3200	40	32	1300	650	580	480	4.5	45
NC-45x2500	2500	45	40	1300	650	580	480	4.5	45
NC-50x2000	2000	50	42	1300	650	580	480	4.5	45
NC-50x3200	3200	50	40	1800	680	650	520	4	110
NC-60x3200	3200	60	50	2000	700	680	550	3.5	121
NC-70x3000	3000	70	60	2000	750	720	600	3.5	125
NC-80x3200	3200	80	70	2500	800	780	620	3	132
NC-90x4000	4000	90	80	3000	900	880	700	3	180